Services

Design for manufacturing and production transfer

Design for manufacturing is the work that makes a working prototype buildable in volume. Production transfer is the package the factory uses: a controlled bill of materials, assembly drawings, a test, and programming instructions.

What usually blocks the jump to volume

The prototype proved the circuit can work. Volume has to work the same way on a line. The failures we keep seeing are ordinary: parts that cannot be bought, footprints that reflow will not forgive, no way to test the board, and programming treated as a laptop on a bench.

  • A lifecycle check on the bill of materials
  • Footprints and panelization a contract manufacturer can assemble
  • Test points and a pass-fail procedure
  • A fixture and a process for programming each unit
  • Documents with revisions, not a folder of Gerbers

How a transfer runs

We review the design with the constraints of assembly, then change what has to change, then write the package. A short pilot on the real line is the check before a large order. We can use an assembly partner you already have, or help you find one. We do not operate a factory.

Questions and answers

What is the difference between a prototype and a production package?

A prototype shows the function. A production package tells a factory how to build, test and program every unit, with alternates for parts and a revision the line can follow.

When should design for manufacturing start?

Before the layout is frozen, not after the first production lot. A review at schematic time is cheaper than a change after tooling.

Do you certify the product?

No. We design for the tests and support the accredited laboratory. The laboratory issues the certificate.